The HexH2O™ PRO v1

A2 flight controller, Futaba controller, 25min flight time and our Payload Release System as standard.

Order now - from $5899

The HexH2o Pro v1

We have carefully selected some of the best components available, so we can deliver what we believe is the best waterproof drone on the market.

The HexH2O Pro v1 comes complete with a 2kg payload release system, quick release legs, DJI A2 flight controller with advanced flight modes and motor failure redundancy. Futaba T10J transmitter, iPad Ground Station for waypoint and mission planning, iOSD for on screen display information and the Zenmuse H4-3D (or H3-3D) gimbal all as standard.

It also features our new design; a slick white body with custom graphics!

You can further configure your order and select from a wide range of high end optional add-ons to further enhance your waterproof drone. You can also discuss your requirements with a QuadH2O technician and we will build, configure and test your HexH2O Pro v1 to your requirements.

Need more information?

If you have some questions or want to know more about the HexH2O Pro v1, you can chat directly to a technician either via online chat, phone or email: contact QuadH2O today.

Full component list

For a full list of supplied components please click on the specs tab above.



What’s Included

build-icon

Professional Build

Your HexH2O Pro v1 will be professionally built, configured and bench tested in-house by one of our technicians.

component-icon-pro

Electrical Components

Your build includes all electrical components including; payload release system, quick release lets, E600 propulsion system, A2 flight controller, radio transmitter, gimbal, video downlink, monitor, antennas and associated chargers. View a full list of included components here.

What’s Required

gopro-icon

Camera

Your HexH2O Pro v1 comes with a pre-installed gimbal, designed specifically to house the GoPro 4 or 3 camera. If you don’t already own a GoPro, one can be ordered when you configure your order.

batteries

Flight Batteries & Charger

Add your preferred flight batteries and a suitable charger. Alternatively these can be purchased via our store when you configure your order.

BUY NOW The HexH2O™ PRO v1

ADVANCED FLIGHT CONTROLLER

The included DJI A2 flight controller is one of the most advanced multirotor stabilization controllers on the market. It ensures total ease of flight, reliability and stability in any situation.

Features include:
  • Intelligent Orientation Control (IOC)
  • Point Of Interest (POI)
  • Auto Return-To-Home/One key Go-Home
  • Cruise Control & ‘Banked Turn’ mode
  • ‘One-Motor Fail’ protection


dji-a2

iPad Ground Station

The HexH2o Pro v1 comes complete with the iPad Ground Station as standard. Fly waypoints via your iPad. Tap And Go waypoint flights, route planning, touchscreen controls, one key takeoff, landing and more.

 

LIVE VIDEO FEED

Get a live video feed direct from your GoPro to the supplied 7″ color monitor which neatly attaches to the supplied radio transmitter. Enjoy maximum range via the ImmersionRC Spironet and Patch antennas and control gimbal pitch via your transmitter for 90° straight down viewing.

black-pearl


GIMBAL for GOPRO

4K stabalized footage

The HexH2o Pro v1 houses all of its components, including a gimbal and GoPro inside the frame, so its fully protected from water and other elements. No more shaky videos… Enjoy super smooth shots both above and below the water!

Professionally Built

Your RTF HexH2O Pro v1 will be built, configured and bench tested by one of our in-house technicians.

ORDER TODAY The HexH2O™ PRO v1

HexH2O Pro v1 ‘Ready to fly’ Specs

Below is a list of included and recommended components and their specifications.

AIRCRAFT
Model HexH2O Pro v1
Airframe Epoxy fibre composite
Frame weight (no electrics) 1400g
Absolute size (unfolded) W740 x H240 x L650 mm
Takeoff weight 4.8kg (fully loaded; 2 flight batteries, gimbal and GoPro)
Battery 6S 7000mAh (or more), 25C+  min. (Run two in parallel recommended)
Usable battery space W130 x H100 x L200mm, aperture: 120 x 90mm
Forward speed ~56 km/h / ~35 miles/h (no wind)
Flight Time 25+ minutes (based on 14000mAh +)
Center of Gravity Inline with the center (fixed) arms
Max wind/gust 25 mph +
Max additional payload 2KG
GIMBAL (INCLUDED) / CAMERA (RECOMMENDED)
Make/Model DJI Zenmuse H3-3D or H4-4D
Support Cameras GoPro 3 or 4 Silver/Black Edition
Gimbal Dimensions (With Damping Unit) 97mm X 95mm X 73mm
Controlled Angle Accuracy Tilt/Roll: ±0.02°;
Yaw: ±0.03°
Features
  1. 3-axis gimbal
  2. High precision brushless servo control
  3. Aluminum alloy body
  4. Built-in IMU module
  5. Light-weight
  6. A2, WKM, NAZA-M V2 supported
  7. GoPro3, GoPro3+ & GoPro 4 supported
  8. Zenmuse technology
VIDEO DOWNLINK (INCLUDED)
Video Transmitter ImmersionRC 25mw or TBS 25mw | CE/FCC certified
Range (open area) Up to 1000m
MONITOR (INCLUDED)
Make FlySky Black Pearl
Screen Type TFT LCD Screen/long life, LED backlight
Resolution 1024×600
Features Built-in 5.8Ghz Dual diversity receiver (automated best reception)
Built-in 2CH 5.8Ghz AV output and 1CH AV input
Support 9 languages menu selection
ANTENNAS (INCLUDED)
Make 2 x ImmersionRc Spironet RH Antennas
Make ImmersionRc RH Patch Antenna
BATTERIES (RECOMMENDED)
Name Gens Ace
Model Tattu
Capacity 7000 mAh
Voltage 22.2 V
Battery Type LiPo 6S High voltage battery
Discharge 25C Constant / 50C Burst
Net Weight 907 g
Dimensions 137 x 42 x 68mm
Max Charge Rate (C) 1-3 C recommended
Plug Type XT90

PROPULSION SYSTEM (INCLUDED)
Make DJI E600
ESC 20A 3-4S 30-450Hz
Motor 415KV short shaft brushless
Propeller 12  x 4.2 prop
FLIGHT CONTROLLER (INCLUDED)
Name DJI A2 with GPS Pro
Operating Temperature -5°C ~ +60°C
Supported Transmitter For Built-In Receiver Futaba FASST Series and DJI DESST Series
Assistant Software Requirements Windows XP/7/8/10, Mac
Hovering Accuracy (GPS Mode) Vertical: ±0.5m
Horizontal: ±1.5m
Max Tilt Angle 35°
Ascent / Descent 6m/s
Total Weight 224g
Dimensions Flight Controller: 54mm x 39mm x 14.9mm
IMU: 41.3mm x 30.5mm x 26.3mm
GPS-Compass Pro: 62mm (diameter) x 14.3mm
LED-BTU-I: 30mm x 30mm x 7.9mm
PMU: 39.5mm x 27.6mm x 9.8mm
Built In Functions Built-in Receiver
Multiple Control Modes
2-axis Gimbal Supported
Low Voltage Protection
PC & Bluetooth Ground Station
External Receiver Supported
Intelligent Orientation Control
Sound Alarm
4 Configurable Output
REMOTE CONTROLLER (INCLUDED)
Name Futaba 8J
Operating Frequency 2.4GHz
Range (open area) 1000m
General 2-stick, 8-channel
Working Current 4.8V
Battery 4-AA 1.2V Dry Cell batteries (sold separately)
Receiver Type  R2008SB 8 Channel
PAYLOAD RELEASE & REMOVABLE LEGS (INCLUDED)
Payload Up to 2KG
Servo Waterproof
OSD (INCLUDED)
Name DJI iOSD mini
Features Real-time display of flight parameters on your monitor
ACCESSORY PACK (INCLUDED)
Mini Level For true motor alignment
Gimbal Lock Locks gimbal in place when transporting
Silicone Greece Complimentary silicone grease for seals
Tool Set Allen key tool set
GoPro Blackout Stickers Apply to GoPro to eliminate dome reflections
QuadH2O Stickers Kit Complimentary sticker kit

download-first-flight

ipad

lightbridge-manual

monitor-manual

A2-manual

quadh2o hexh2o sarah2o hexh2o pro v2
Name QuadH2O HexH2O SaraH2O HexH2O Pro v2
Price (from) $849 USD $1049 USD $4795 USD $6449 USD
Availabe As Kit (frame only) Kit (frame only) Ready to Fly Ready to Fly
Weather Conditions Rain/snow, land on water Rain/snow, land on water Rain/snow, land on water Rain/snow, land on water
Film underwater Yes Yes Yes Yes
Film straight down Yes Yes Yes (not IR camera) Yes
Operating Range Up to 1km Up to 1km Up to 1km Up to 3.5km
Max flight time 12 mins 25 mins 25 mins 30 mins
Max payload 600g 2000g 1000g 2000g
Recommended Battery 4S 5000mAh
Lithium polymer
2 x 6S 7000mAh
Lithium polymer
2 x 6S 7000mAh
6S Lithium polymer
2 x 6S 8000mAh
6S Lithium polymer
Motor Redundancy No Yes Yes Yes
Camera Sony FPV & GoPro Hero 3, 3+ or 4 GoPro Hero 4 GoPro 4 + FlirVue/Pro DJI X3
Gimbal Swellpro 2 axis
(optional)
DJI H3-3D / H4-4D DJI H3-3D / H4-4D DJI X3
FPV Downlink Quality ImmersionRC 5.8Ghz, 480p ImmersionRC 5.8Ghz, 480p ImmersionRC 5.8Ghz, 480p DJI Lightbridge HD 1080p
Camera Control Continuous record/video Continuous record/video Continuous record/video Start/stop record/video, shutter, exposure, playback
Flight Controller DJI Naza v2 DJI Naza v2 / A2 DJI Naza v2 / A2 DJI Naza N3

Frequently asked questions

Is the HexH2o Pro v1 waterproof?

The HexH2O Pro v1 is designed and developed to be a sealed, water tight unit, with exception of the two breather tubes (which allow the barometer within the flight controller to measure outside air pressure, and are designed to let air in/out but not water) and the motors.

What's It made out of?

The body is made of Epoxy fibre composite which makes it very strong, lightweight and rigid.

The viewing dome is perspex whilst the rear hatch and various internal parts are 3D printed.

Can you recommend Gains settings for the A2 & Wookong-M

These are a good starting point: Pitch:200% Roll:200% Yaw: 150% Vertical: 100% Atti Gain: 80% & 80%.

Can you give me the GPS location settings?

Presuming you fit the GPS in the specified area, level and facing forward, they should be: X = -5cm | Y = 0 | Z = -8cm.

Can you give me the IMU location settings? (A2 and Wooking-M only)

Presuming you fit the IMU in the specified area, level and facing forward, they should be: X = 8cm | Y = 3cm | Z = 2cm.

It's a sealed unit...Doesn't it overheat?

We have tested the HexH2O Pro v1 in ambient temperatures of 38 degrees. The external heat sinks on the ESC's and internal fan keeps things cool and circulates the air inside.

What flight times can I expect?

This will greatly depend on your setup, battery, internal components, payload etc. However based on our recommended set up (which you can find in our build guideline) and as per our RTF models you can expect a solid 22-25 minute flight times on a 2 Lipo setup and approx 15-17 minute flight times on a single Lipo setup.

What size battery can it take?

We have run tests both with 1 and 2 6S Lipos ranging from 6-8000mAh. The HexH2O has a large battery compartment with inside dimensions of L180mm x W130mm x H100mm, aperture: 120mm x 90mm.

Longer flight times could be achieved with different weight and capacity batteries.

With 2 x 7000mAh lipo’s you should expect between 22-25mins flight time (depending on flight conditions)

How big is the HexH2O Pro v1?

The overall size of the HexH2O Pro v1 is L650mm x W740mm x H240mm (unfolded).

The body size is L400mm x W380mm x H150mm.

Transport (box) size (when folded) would need to be W750mm x L380mm x H240mm (internal dimensions). We recommend and can supply the Peli 1730 case.

What does the HexH2O Pro v1 weigh?

The HexH2O Pro v1 body (no electrics or batteries) weighs around 1.4kg.

When fully loaded with 2 x 7000mAh Lipos, GoPro, gimbal, downlink, OSD the HexH2o Pro v1 weighs approx. 4.7KG.

Will the HexH2O Pro v1 work with other gimbals?

Technically any gimbal that physically fits inside the hull and has the same popular ‘hang under’ design as the DJI Zenmuse-h4-3d gimbal should be ok.

Do I need to get anything else when ordering the HexH2O Pro v1?

Yes, due to shipping regulations we do not supply flight batteries as standard (we can to come locations but there is a shipping fee supplement).

Therefore it may be more cost effective to source your own flight batteries. Your RTF HexH2O Pro v1 will come with a XT60 or XT90 connector (check with us for conformation).

Does the HexH2O Pro v1 have a live video feed?

Yes. Video is transmitted from the GoPro directly to the monitor attached to your transmitter on the ground. This is not via wifi, so there is no lag.

Press Pack

If you would like to write an article about the HexH2O Pro v1 drone, please feel free to use the content below, or adapt it to your needs. Also below you will find the HexH2O Pro v1 & QuadH2O logo and our official product images which you are free to use with your article. Thank you for your support.

Press Release Product Pics Logo

BUY NOW BUY THE HexH2O™ Pro v1