Flir video feed interference

The Lightbridge 2 unit uses 5.8 GHz for master-/slave-communication (in case you use a two-operator setup). Because of this is can interfere with the video transmission from the Flir camera to the round monitor, causing a ‘pulsing’ effect.

This tutorial will cover how to eliminate the ‘pulsing’ interference caused by the LB2 unit.

  1. From within the DJI GO app, head to the RC settings.
  2. Within the ‘Master and Slave’ settings, set your RC status to ‘OFF’.

This will eliminate any pulsing interference on your video feed.