HexH2O™ PRO v3 – Ready To Build

From: $1,995.00

Our most powerful waterproof drone the HexH2O Pro v3 – the ultimate waterproof drone, now available in a ‘Ready To Build’ version.

Each HexH2O Pro v3 is professionally prepared by a QuadH2O technician. All you need to do is configure your order with the parts you require and follow our easy step by step build guide.

Full specification of the HexH2O Pro v3 drone can be found here: HexH2O Pro v3 Specifications.

Please note: The HexH2O PRO is not suited for beginners. Previous drone build experience is advised and knowledge of DJI components an advantage. Soldering is required as part of the build process. Take a look through the Build Guide

Included as standard

  • Quick release legs fitted
  • LED stand off and grommet fitted
  • Grommets and battery fixings installed
  • Carbon top plates built
  • Breather system fitted
  • Buoyancy aids fitted

Please Note: Our HexH2O Pro V3 Kit and Ready To Build versions do not include graphics. The bodies will be supplied in white with no graphics.



Available to order.

  • Propulsion System

    The HexH2O PRO V3 propulsion system.

    Included components

    • 6 x motors, fitted to motor mounts, ready for installation
    • Full set of propellers
    • Custom 40A ESCs with heat sinks and MT60 connectors, ready for installation
    • 0 $
    • 865 $

    Wiring loom

    The HexH2O PRO V3 wiring loom includes a 8 point distribution board. The loom will be supplied with the ESCs pre-soldered to the board and ready for you to install.

    Included components

    • 8 point distribution board with ESCs pre-soldered
    • Power lead harness with XT90 anti spark connector and XT90 - XT60 parallel connector (for twin battery installation)
    • XT60 power supply harness to power the electrics tray
    • MT30 connector to power X3 camera
    • MT30 connector to power fan
    • 0 $
    • 75 $

    N3 Flight Controller

    The HexH2O PRO v3 is specifically designed for the DJI N3 flight controller. If the N3 flight controller is ordered with the propulsion system and wiring loom, the loom, ESC's, GPS module and carbon top plates will come pre-installed and sealed on your HexH2O PRO v3.

    • 0 $
    • 465 $

    Lightbridge 2

    The HexH2O PRO v3 is specifically designed for the DJI Lightbridge 2, providing HD video downlink and a range of up to 3.5Km.

    • 0 $
    • 1057 $

    X3 camera bundle

    The HexH2O PRO v3 is specifically designed for the DJI X3 camera. In order to use the X3 camera the Matrice 600 camera mount (require to mount the camera to the drone) and OSMO handle (required to flash the OSMO firmware to the camera) are also needed, and are provided as part of this bundle.

    Note - the OSMO handle can be used with the X3 camera as a handheld gimbal system.

    Included components

    • DJI X3 camera
    • DJI Matrice 600 X3 camera mount
    • DJI OSMO handle (this can also be used as a handheld gimbal)
    • 0 $
    • 845 $

    Payload release system (optional)

    The optional HexH2O PRO v3 payload release system is a strong 3D printed, servo operated system that can carry and release payloads of up to 2KG (tested to 8KG).

    The payload release will be supplied, fitted and sealed to the HexH2O PRO v3.

    Included components

    • DJI channel expansion kit
    • Payload release system and waterproof servo
    • 0 $
    • 390 $


    The HexH2O Pro v3 requires a tablet or mobile device in order to be able to take advanced of the 'DJI Go' App. You can use your own tablet/mobile or we can supply the iPad mini tablet which seamlessly integrates with the system.

    • 0 $
    • 325 $
    • 497 $

    Travel/Flight case

    The Peli 1730  - crushproof, dustproof, airtight, watertight and with a lifetime guarantee this is the perfect travel case for the HexH2o Pro v3. Your case interior will be custom fitted to your order by a QuadH2o technician.

    • 0 $
    • 710 $

    Shipping supplement

    Peli flight case increases the overall shipping size and weight of your delivery (+22kg). Due to this increase in size and weight there is an additional shipping charge.

    Please select your shipping region from below and the charges will be automatically added to your cart.

    • Select Destination

    • 300 $

    Flight Batteries

    The Gens Ace Tattu flight battery has unbeatable quality that offers premium power and reliability. Run two batteries in parallel for up to 30 minutes flight time.

    TRAVELLING OVERSEAS? - If you intend to travel overseas with your HexH2O Pro v3, please contact us before placing you order.

    IMPORTANT - please note that due to new aviation laws we are only able to supply flight batteries to Europe, USA and Canada. If you are located elsewhere you will need to purchase your flight batteries locally.

    • 0 $
    • 399 $
    • 750 $
    • 1050 $

    Shipping supplement

    Flight batteries are classed as 'dangerous goods' and unfortunately incur a shipping surcharge.

    These charges will be automatically added to our standard shipping fee at checkout.

    • 55 $

    Flight Battery Charger

    The SKYRC Q200 is a four channel charger with four independent circuits, so you can charge up to four flight batteries simultaneously.

    Charge Circuit Power - DC Input CHA/CHB 100W, CHC/CHD 50W, AC Input CHA+CHC=100W, CHB+CHD 100W

    • 0 $
    • 225 $

    Additional options

    Below are some carefully selected optional add-ons for your ultimate flying machine.

    Please note  If selecting our Payload Release System, the required 'DJI Channel Expansion Kit' will automatically be added to your order.

    • 49.99 $
    • 80 $
    • 240 $
    • 44.9 $
    • 95 $
Categories: ,

Images Please note the HexH2O Pro V3 does not include the graphics as pictured. The machines will be supplied in plain white.

Delivery Info All our machines are hand made to order. Please allow approx. 3-6 weeks for delivery.

Need Help? If you need help configuring your order please contact us via email or live chat and we will be happy to discuss your requirements.

Build Guide Check out our easy to follow HEXH2O PRO V3 build guide and user manual.